GOODWAY SW-32 SWISS TURNING CENTER
GOODWAY SW-32 SWISS TURNING CENTER
| CAPACITY | SW-42 | ||
|---|---|---|---|
| Working range | Max. machining diameter | Ø42 | |
| Max. turning length per chuck (mm) | 180 / 110 (bush / bushless) | ||
| O.D. tools | Number of tools | 5 | 6 |
| Shank size (mm) | □20 | □20 × 1 / □16 × 5 | |
| I.D. tools | Number of tools | 5 | |
| Sleeve size | ER20 | ||
| Cross live tools | Number of tools | 4 ~ 10 | |
| Max. spindle speed (rpm) | 6,000 | ||
| Spindle | Max. spindle speed (rpm) | 6,000 | |
| Motor output (cont.) kW | 5.5 | ||
| Motor output (30 min.) kW | 7.5 | ||
| BACKWORKING TOOLING SYSTEM | |||
| Back processing capacity | Max. chucking diameter (mm) | Ø42 | |
| Max. length for front ejection (mm) | 110 | ||
| Rear-end tools | Number of tools | 4 | |
| Max. spindle speed (rpm) | 5,000 | ||
| Sub-spindle | Max. spindle speed (rpm) | 6,000 | |
| Motor output (cont.) kW | 3.7 | ||
| Motor output (30 min.) kW | 5.5 | ||
| Preferred Equipment | |
|---|---|
| Preferred equipment of leading European watch manufacturers. | |
| Optimal Production | |
| Optimal production solution for small and medium-diameter workpieces. | |
| Flexible Tooling System | |
| The complete tooling system enables turning, milling, drilling, and tapping on the front, side, and rear in a single setup. | |
| Various live tooling holders such as hobbing, slotting, and thread whirling can be installed as needed. | |
| Comprehensive Machining Capability | |
| The hybrid guide bushing design allows switching between guide bush and bushless bushing modes based on production needs. | |
| The clamping mechanism uses rotary hydraulic cylinder drive design, providing ample clamping force to meet the demands of heavy cutting. | |
| Control Functions | |
| Standard “Air Bag” function to prevent significant cost losses in case of accidental collisions. | |
| Optional “OCR Oscillation Cutting” function effectively prevents chip entanglement and improves machine utilization. |
| Optional Features | |
|---|---|
| Coolant through tool | |
| Coolant through sub-spindle | |
| Hobbing | |
| Manual handle retrace | |
| Chip conveyor | |
| Electrical cabinet A/C cooling system | |
| Oil mist collector | |
| High pressure coolant system |