Standard Accessories |
| 1. Full splash guard |
| 2. Belt type spindle 10000 rpm BT40 |
| 3. Spindle motor 7.5/11 kw |
| 4. Arm type ATC 24 tools, BT40 |
| 5. Rigid tapping |
| 6. Cooling system |
| 7. Auto lubrication system |
| 8. Spindle oil cooler unit |
| 9. Heat exchanger |
| 10. Telescopic cover for 3 axes |
| 11. Work lamp |
| 12. Three-color call light |
| 13. Tool box |
| 14. Coolant gun |
| 15. Screw type chip conveyor with chip cart |
Optional Accessories |
| 1. Transformer |
| 2. CE Mark |
| 3. Spindle motor 11/15 kw |
| 4. Spindle motor 15/18.5 kw |
| 5. Arm type ATC 30 tools, BT40 |
| 6. Belt type spindle 12000 rpm, BT40 |
| 7. Direct drive spindle 10000/12000/15000 rpm |
| 8. Built-in type spindle 16000/20000/24000/36000 rpm |
| 9. Rear coolant flushing device |
| 10. Disk type oil skimmer |
| 11. Coolant through spindle (with sealed splash guard) |
| 12. Chain type chip conveyor with chip cart |
| 13. Roller type linear guideway |
| 14. 4th axis rotary table |
| 15. Gear box |
4-Axis SUNMILL JHV-1200 Vertical Machining Center
4-Axis SUNMILL JHV-1200 Vertical Machining Center
| Contents | Items | Units | JHV-1100 | JHV-1200 | ||
| 3- Axes travel | X axis travel | mm | 1100 | 1200 | ||
|---|---|---|---|---|---|---|
| Y axis travel | mm | 650 | 650 | |||
| Z axis travel | mm | 610 | 810(BT40) opt. | 720(BT50) opt. | ||
| Distance from spindle nose to table surface |
mm | 120-730 | 120-930 | 150-870 | ||
| Table | Table area | mm | 1250 x 630 | 1350 x 630 | ||
| Max. load of table | kgs | 800 | 800 | |||
| T- slot | mm | 5 x 18 x 100 | 5 x 18 x 100 | |||
| Spindle | Spindle taper | type | BT-40 (BT-50 opt.) | BT-40 (BT-50 opt.) | ||
| Belt type | rpm | 10000 | 10000 | |||
| Direct drive - opt. | rpm | 10000 / 12000 / 15000 | 10000 / 12000 / 15000 | |||
| Spindle motor | kw | 7.5 / 11 | 7.5 / 11 | |||
| Spindle cooling | type | oil cooler | oil cooler | |||
| Feed Rate | Rapid traverse (X,Y,Z) | m/min | 30 / 30 / 24 | 30 / 30 / 24 | ||
| Cutting feed rate | mm/min | 1-15000 | 1-15000 | |||
| X,Y,Z axis servo motor (FANUC) | kw | 3 / 3 / 3 | 3 / 3 / 3 | |||
| X,Y,Z axis servo motor (MITSUBISHI) | kw | 3.5 / 3.5 / 3.5 | 3.5 / 3.5 / 3.5 | |||
| A.T.C | Magazine type | type | Arm | Arm | ||
| Tool magazine capacity | pcs | 24 | 24 | |||
| Max. tool diameter | mm | 75 / 150 | 75 / 150 | |||
| Max. tool length | mm | 250 | 250 | |||
| Max. tool weight | kgs | 7 | 7 | |||
| Tool selection | type | Random | Random | |||
| Others | Power consumption | KVA | 20 | 20 | ||
| Floor space (L x W x H) | mm | 3750 x 2600 x 2950 | 3750 x 2600 x 2950 | |||
| Machine weight | kgs | 7300 | 7800 | |||
| *Design and specifications are subject to change without prior notice. | ||||||